How to get cgdi mb tokens and exchange points

Are you searching for the method to get CGDI prog MB tokens and exchange points for password calculation service? Here Eobdtool.co.uk will give you answer.

What is the token policy for CGDI Prog MB?

Subscription A: CGDI Prog MB can calculate the password twice for free each day for the first 180 days (from the day you activate device)
When license gets expired, It will cost usd60 for another 180 days tokens, please pay to Token Service 180 Days for CGDI Prog MB Key Programmer.
Subscription B: One free token each day all the time. And it won't get expired anymore. If you want more tokens, you can get via following ways:
1. Earn points when you use the CGDI Pro MB device, one point equals one token, you can redeem token in software yourself.
2. If you have CGDI Prog BMW MSV80, we can bundle with your CGDI MB to have one more token per day, which means 2 free tokens each day
3. If you have CG100 PROG III Airbag Restore Devices, and CG Pro 9S12, please pass us serial number to bundle them together, you will have two more tokens, which means 4 free tokens per day.
4. If you don't have other CGDI device but still want to calculate password more times, one token will cost 5usd. Please pay for One Token for CGDI Prog MB


Notice: You can calculate 4 times at most each day.
How to collect and exchange CGDI prog MB key Points?
Step 1: Connect CGDI prog MB to PC well
Go to CGMB software and click “Key Points” at the top right

Step 2: Power on the device and insert the Benz key into CGDI prog MB device

Step 3: Click “Key check” in the online store page
Note: If the system prompts “Key points not collected”, please click “OK” to access next step.
Otherwise, these key points have been collected or the key is not original CGDI product.

Step 4: Click “Collect points”, it will show “200 points” and prompts “Key points collected successfully”
Click “OK”

Step 5: Select “Credits exchange” to convert the key points
It will prompt “Will the points be converted? Do you want to continue?”
Click “YES”

Step 6: Every 200 key points can be redeemed for one password calculation service
CGMB software will show “Successful redemption” if the key points are exchanged successfully

Hope it can help you out! Enjoy!

How to use CGDI BMW to read/ write BMW N13/N20 and N55 ISN

How to use CGDI prog BMW MSV80 to read/ write BMW N13, N20 and N55 ISN without unsoldering?
Here share a real story from a customer. Hope can help you out.

Background:

A customer lost his all BMW car keys. He let a locksmith program a new key to his car. The locksmith made a small incision in the engine to program new keys. But the locksmith forgot to seal the incision when he finished all the work.

The car owner washed his car and caused water get into the DME. He asked BMW dealer whether the car has warranty when repaired outside. The BMW dealer told him cannot. Finally, the car owner changed a new ECU in the BMW store, but the BMW dealer didn’t find the incision so that compensated 30,000 RMB to the car owner.
So! Is there a fast and safe method to read BMW ISN without unsoldering or punching?
Of course! Here I’d like to share the method with wiring harness.
It’s very easy to use, only need to unplug the port from the car and connect the harness with DME.
Test on three different kinds of DME: N13, N20 and N55.
Note: Wiring harness cannot be mixed, only used in the corresponding model of DME.

1.Test N20 DME -OK
Plug the wiring harness to N20 ECU
Connect CGDI prog BMW to N20 ECU via OBD
Power on and keep the voltage stable (about 12V)

Open CGDI BMW software
Select “BMW ISN Read Write”-> “Read DME ISN”
Read N20 DME ISN successfully

Modify the last three numbers of ISN to 888
Click “Write DME ISN”
Write new DME ISN successfully

Return to CGDI BMW menu
Select “BMW ISN Read Write”-> “Read DME ISN” to read info again
The new DME ISN is read succeed

2.Test N13 DME -OK
Connect all the devices well as same as the N20
Go to CGDI BMW software-> “BMW ISN Read Write”-> “Read DME ISN”
Read N13 DME ISN successfully

Modify the last three numbers of ISN to 888
Click “Write DME ISN”
Write new DME ISN successfully

Return to CGDI BMW menu
Repeat the same steps to read DME ISN
Read New DME ISN succeed

3.Test N55 DME –OK
Read new DME ISN successfully

Done!

Source: http://blog.eobdtool.co.uk/cgdi-prog-bmw-read-n13-n20-and-n55-isn-without-unsoldering-all-ok/

CGDI MB program new key for Benz GL440

This article is to share my experience with using CGDI prog MB to program new key to Benz GL440.

Here you go!

Firstly, I connect cgdi mb to my GL440 via OBD, and connect cgdi mb to PC by usb.

My car is one-click start, it cannot program new key. So I take out the one-click start button and insert the smart car key.

 

When I open CGMB software, it prompts “Error downloading update profile, please check network connection".

I try to connect by my smart phone spot.

Good! The network is connected successfully.

Now I start to program my car key.

The detailed operation steps as below

Step 1: Collect EIS Data

Step 2: Calculate password

Step 3: Generate key

Step 4: Write new key

Step 5: Test new key

In detail…

Step 1: Collect EIS Data

Insert the original gl440 car key to CGDI MB device to read key info

Return to CGDI MB software

Select “Read/ Write Key”-> “Infrared”-> “Read Key/ Chip”

It shows this key is on position 3, no used!

At this time, need to read EIS data to confirm whether the original can match or not.

Select “EIS”–>”Read EIS Data” to display key info

The key can program new key.

Click “Compute Password”–>”Copy key with key” –> “Collect Data”

Follow the prompt to select other key mode, and then click “OK”

Insert the original key into EIS and click “OK”

Note: Insert the key, no need to twist it

Then insert the original key into CGDI MB device, and click “OK”

 

It will take about 3 minutes to collect data

EIS data is collected successfully

Insert the original key into EIS again and click “OK”

Wait for 10s, and take out the key

Insert the original car key into EIS again

Take out the key for 5s, and insert into EIS again

Insert the original key into CGDI MB coil again

Click “OK” to collect data

Collecting data is complete and save data to desktop

Save file successfully

Click “Upload Data” and open the file saved just now to upload

Upload the data successfully

Step 2: Calculate password

Click “Query Result” to calculate password

This procedure needs about 2 minutes

Computing success

Copy the password calculated to desktop to backup

Click “EIS”-> Paste the password-> “Save EIS Data”

Step 3: Generate key

Select “Generate EE”-> Remove the tick mark of key 3

Click “Load EIS file” to check EIS data information

The EIS file includes SSID, key password and VIN

Confirm the key password is correct

Click “Generate key file”

It takes 1 minute to generate

Save the file to desktop

Generate successfully

Step 4: Write new key

Put the new key into cgdi rog mb to read info

Select “Read/ Write Key”-> “Infrared”-> “Read Key/ Chip”

It shows this new is not used

Click “Reset” to erase the key data

Note: Regardless of the key is used or not, please remember to erase the data, otherwise will be failed to write

Reset operation succeed

Click “Open/Write” button

Note: Smart key please choose 41 format, common key and BE key please choose 51 format! When writing the original key, please make sure that it is wiped by the CGMB, otherwise the write will fail!

Choose one key unused file to write

Write success

Click “Read key/ chip” to confirm whether the key is written successfully or not

Step 5: Test new key

Finish all the steps above. The last step is to test the new key.

Insert the new key into EIS to learn automatically

Light up the instrument- OK

Remote the window- OK

Turn on ignition switch- OK

CGDI prog MB program Benz GL440 smart key successfully

Hope can help you out! Enjoy!

CGDI BMW Add BMW E-series iDrive Coding

Eobdtool.co.uk launched the newest CGDI prog BMW MSV80 update info in June 2019. Here share the relevant update details.

CGDI BMW latest update in June 2019

1.Add BMW E-series iDrive Coding(Refresh hidden function)
2.Add BMW E/ F/ G series diagnosis (read and clear DTC)
Note: CGDI prog BMW diagnostic function can free open and upgrade



CGDI Prog BMW V2.6.0 Update on March 5^th, 2019

1.Added: EWS1-3 key matching function
2.The E-code is modified to modify the VO code function, and the VO code can be added or deleted directly by the selection method, and the operation is simpler.
3. The BMW data modification adds support for both N13 and N55 engine data.

Find more CGDI BMW: http://blog.eobdtool.co.uk/tag/cgdi-bmw/

CGDI Prog BMW MSV80 Compare with E-Sys PRO/ISTA-D

Are you searching for a diagnostic tool for your BMW car? CGDI Prog BMW MSV80, E-Sys and ISTA-D all can do programming, coding and diagnosis. Which is your best choice?

CGDI PROG BMW Key programmer updated newest functions below

1.Add BMW E-series iDrive coding function
2.Add BMW E/F/G series diagnostic (Read and Clear DTC)
Note: CGDI prog BMW diagnostic function can free open and upgrade

Which is difference among CGDI prog BMW, E-Sys and ISTA-D?

For User requirements
CGDI BMW key programmer can be used for more people without professional training, and the users no need English knowledge, only need related automobile knowledge to operate.
But for E-Sys BMW users, need training for more than one month.
For usage cost
CGDI prog BMW MSV80 reduces the hardware cost of programming, coding and diagnosis.
ICOM is the original hardware used for BMW E series programming, coding and diagnosis. The original ICOM not only usually costs thousands of Dollars, but also is difficult to install. In order to use easily, many users prefer to buy the original ICOM which has been installed BMW ISTA-D. However CGDI BMW MSV80 is cheaper and more convenient to use.
For users’ time cost
BMW ISTA-D needs users to operate manually.
CGDI prog BMW can operate by following the guide automatically. Save the BMW users’ operation time greatly.
For technical support
BMW E-Sys and ISTA-D cannot offer technical support, but CGDI BMW key programmer supports.In conclusion:
CGDI PROG BMW MSV80 CAS Key Programmer is the winner!
It not only can be used for the majority users without training, also offers technical support, save time and cost.

Source: http://blog.eobdtool.co.uk/cgdi-prog-bmw-msv80-vs-e-sys-pro-vs-ista-d/

CGDI BMW program BMW F series ECU after coding

How to use CGDI BMW key programmer to program BMW F series ECU after coding?
Here is the detailed guide for CGDI programmer owners.
Step 1: Connect to CGDI Prog BMW MSV 80
Step 2: Coding
Step 3: Program ECU
Step-by-step guide:
Step 1: Connect to CGDI Prog BMW MSV 80
Connect CGDI Prog BMW to the car and PC
Turn on the ignition switch

Step 2: Coding
Go to CGDI BMW Software Menu
Click on “BMW F/G Series Program”

Read Central gateway module 2 data successfully

Click “Program”
Note: ECU is about to programmed, please ensure that car battery has enough power, the programming process, please keep equipment cable connection. Whether to continue?
Click “YES”

Prompt “Whether to backup coding data”
Click “YES”

Coding is successful
Step 3: Program ECU
Getting a list of programming files from the server
Select all options and click “OK”

Please confirm whether the following VIN is correct. If it’s wrong, please modify in the textbox below.
Then click “OK”

Programming ECU

Program ECU Successfully
Note:
1.If the code is not set after programming, please use the function of "BMW F/G coding" to set the code. If some modules (such as gateway) do not need the code setting, this step can be ignored.
2.Airbag: If the sunroof and Windows are abnormal, please use the "ECU initialization" function to initialize them.
Then click “OK”

Job’s done!

Original: http://blog.eobdtool.co.uk/how-to-program-ecu-on-2016-bmw-f-series-with-cgdi-prog-bmw/