Learn about CGDI MB Full and Basic Version

CGDI MB Full Version is English version, the basic version is the Chinese version sold abroad and will have risk to be locked.

1. CGDI MB Full Versionis the English version, it comes with the Mileage Repair and Gateway Read/Write Authorization Free (Since March 2nd, 2019);

FYI, if your CGDI Benz was bought before March 2nd, 2019, you are supposed to pay at here:

http://www.eobdtool.co.uk/wholesale/cgdi-mb-mileage-correction-authorization.html



Image 1: Mileage Repair and Gateway Read/Write (Authorization)

Moreover, CGDI MB supports more old Mercedes cars key programming by OBD such as:

W210, W203, W639, W220,W215, W169

Mercedes E Series W210 before year 2004

Mercedes C Series W203 before year 2005

Mercedes V Series V639 before year 2008

Mercedes A Series W169 before year 2009

Mercedes B Series W169 before year 2009

Mercedes S Series W220 before year 2005

Mercedes E Series W211 before year 2008

2. CGDI MB Basic Versionis the Chinese version, which is sold abroad by a partial sellers, it has the risk to be blocked by CG Company.

News!!! CGDI MB Full Version on sale at March, 2019:

http://www.eobdtool.co.uk/wholesale/cgdi-prog-mb-benz-key-programmer.html

Buy one CGDI MB get one CGDI ELV ESL Emulator for free.

CGDI MB ELV Simulator for Benz 204 207 212:

Most W204 W207 W212 ESL will be damaged with EIS. In this case, there are two possible reasons and solutions:

ESL motor is damaged and need to replace a new motor

NEC chip is locked, theoretically it can be unlock, actually it needs to replace new ESL.

























Source: CGDI MB Full Version VS CGDI MB Basic Version

"CGDI BMW 21E1 FEM BDC version does not support" error Solution

Analyze why CGDI BMW key programmer prompts "21E1 FEM BDC version does not support, please upgrade FEM/BDC first " when you use it to program FEM /BDC key via OBD, and How to solved in step by step procedure (with images).

Fact:
Because some BMW F series with FEM / BDC Immobilizer system has higher or lower firmware version, the user will get message "21E1 FEM BDC version does not support, please upgrade FEM BDC first " when using CGDI BMW to program key via OBD. then many users tend to think their FEM/BDC is not supported by CGDI BMW and miss the chance to earn money. In the following parts, I will show you how to solve this problem.

How to solve?
The solution is offered by eobdtool.co.uk engineer:

1. Make sure the BMW car has full voltage, use the OBDII cable to connect CGDI BMWto the BMW.

2. Select "FEM / BDC key Match", then you may get prompt "FEM/BDC version is not supported, please upgrade FEM/BDC first".

3. Turn on ignition switch and let the door open, select "F /G series program".

Select "2 . FEM _Body", then "Begin Program".

4. Turn on ignition switch and let the door open, select "F /G series coding".

Select "2 . FEM _Body", then "Coding".

5. The system prompt that all are fine, just follow the on-screen instruction to operate.

Done.

http://blog.eobdtool.co.uk/how-to-solve-cgdi-bmw-21e1-fem-bdc-version-does-not-support-error/

CGDI BMW program FEM BDC successfully with 8-Foot Chip Adapter

This is my working desk, you can see one 8-Foot Chip Adapter is plugged to CGDI BMW which is plugged to a computer, also CGDI BMW is connected to a BMW FEM /BDC test Platform which is connected to FEM /BDC immobilizer module. 

Generally speaking, I need:

One 8-Foot Chip Adapter

One CGDI BMW

One BMW FEM /BDC test Platform (used to test if FEM/BDC immobilizer system is good or bad)


One blank key



Since this tool is easy to use, what you need to do is read the on-screen message and follow it to do. so I didn't take many photos here, but only two ones here.



Image 1: all are fine.




Image 2: Read out password, ISN, Key Sync Code, DME ISN.



http://blog.eobdtool.co.uk/cgdi-bmw-program-fem-bdc-successfully-with-8-foot-chip-adapter/

How to use CGDI MB to write the original key through the NEC adapter?

How to use CGDI MB to write the original key through the NEC adapter?

Here we go for procedure.


Please insert the key into CG-MB device





Click ''Read key/chip'" and get related key information.





Disassemble the key, take the chip out, and solder it to the NEC adapter.





Click on "Read key /chip" and view related information.





Reset and erase new key





Click open/write, please do by following the on-screen instructions.



Choose一unused key position data,click and open it.




Write success fully.





Take the chip out, weld NEC adapter back the key, get on the car.

http://blog.eobdtool.co.uk/cgdi-mb-write-the-original-key-through-the-nec-adapter/

Use CG-Pro and CGDI MB to Match New Key for Benz W639

Car model: Benz W639

Tools: CG-Pro & CGDI Prog MB

Program: Match the new key

Take down lock, check the number

EIS related chip

Run CG-Pro software and enter into the related operation interface

View wiring diagram

Connect CG-Pro with EIS

Read data successfully and save it

Run CG-MB software, Load the data saved by CG-Pro just now

Load EIS data successfully, show the password directly

Save EIS data, please default the file name

Go to “Generate EE”, load the EIS data just saved

Load successfully, please check whether all information is correct

Click ”Generate key file”, please wait...

Key file generated successfully, please save data file

Go to “Read key”

Insert new key into CGDI MB

Click read, show related information

Click write, please note the prompt, Click ok

Choose unused key data file, click and open it

Write success, put EIS back, then just get on car to learning it

Lonsdor JLR doctor is a key tool for Jaguar and Landrover

OBDSTAR release a new key programmer for Opel: OBDSTAR H111

Mart tool key programmer is specially for Land Rover and Jaguar KVM Keys

VIDENT is a new diagnostic tools brand